Inserting Instruments - KaVo STERIclave B 2200 Operating Instruction

Operating Instruction STERIclave B 2200 / 2200 P
|
6 Operation

6.3 Inserting instruments

CAUTION
6.3 Inserting instruments
Dirty instruments
Premature wear due to staining, encrustation and gradual blocking of filters, valves
and hydraulic lines.
▶ Clean instruments prior to sterilisation.
▶ Prepare the instruments carefully in accordance with the manufacturer's recom‐
mendations.
▶ Check that there is enough water in the tank and that the min. LED is not lit.
See also: 6.10 Changing the water, Page 54
▶ Place the instruments on the trays and insert the trays into the chamber.
See also: 5 Loading example, Page 33
▶ Close the door.
Note
A continuous tone will sound if the door is not closed properly.
44/78