Start Special S1, S2 Or S3 - KaVo STERIclave B 2200 Operating Instruction

Operating Instruction STERIclave B 2200 / 2200 P
|
6 Operation 6.4 Selecting and starting a program
+
such as for program 1
① Sterilisation time
② Number of vacuum phases

6.4.5 Start Special S1, S2 or S3

▶ Press the Start/Stop button to start the selected program.
The sterilisation cycle starts. The program sequence LEDs light up to indicate
which phase of the cycle is currently active.
See also: 6.6 Tracking the program sequence, Page 50
▶ Press and hold down 4 and use the Up or Down button to select the Special S1
program.
The selected program will appear for 5 seconds on the pressure display.
③ Sterilisation temperature
47/78