Sense Function (Sense) - ITech IT-M3900C Series User Manual

4. After the parameter settings are complete, press [Enter].

5.7 Sense Function (Sense)

This menu item is used to switch the power supply to local measurement or re-
mote sensing.
This series power supply supports two connection methods: Local measure-
ment and Remote sensing. The remote sensing is used for maximizing meas-
urement accuracy. (Refer to
The procedures to set the menu item are as follows.
Category Parameter
Upper limit of current: I+, and
lower limit of current: I-
Upper limit of power: P+, and
lower limit of power: P-
[On/Off] status
Config Mode
menu
Speed
V-Rise Time/I-Rise Time
V-Fall Time/I-Fall Time
Output Res
On Delay/Off Delay
•
Last: Indicates when powered on, the instrument will remain the same
parameter settings and output status as last time you powered off the
instrument.
•
Last+Off: Indicates when powered on, the instrument will remain the
same settings as last time you powered off the instrument, but the output
status is Off.
For example, Last is selected, and the voltage value is set to 8V. After the
instrument is powered off and then powered on, the voltage displayed on the
interface is 8V.
Copyright © Itech Electronic Co., Ltd.
2.4 Connecting the Device Under Test
Basic Operation
Initial Value
One percent of the
rated current of the
instrument
Rated power value of
the instrument
Off
CV
High
0.1s
1000
0
(DUT))
134