Recall Operation; Data Logging Function - ITech IT-M3900C Series User Manual

1. Press the composite keys [Shift]+[Recall] (Save) to enter the parameter
2. Press the composite keys [Shift]+[+/-] (Save) to enter the parameter save
3. Set the storage location.
4. Press [Enter] to save the parameters.

5.3.2 Recall Operation

You can recall the parameters you saved in the specified memory location as
the setting values.
1. Press [Recall] to enter the parameter recall interface.
2. Set the storage location.
3. Press [Enter] to recall the parameters.

5.4 Data Logging Function

This series Bi-directional Programmable DC Power Supply supports the record-
ing and saving of test data. This Chapter introduces how to use this function in
details.
The user can select the following data sources for recording:
•
•
•
Configure the Function Menu
1. Press the composite button [Shift]+[1] (Log) on the front panel to enter the
save interface. (1U Model)
interface. (2U Model)
Enter a number in the "Save data to bank=1" to set the storage location in
non-volatile memory.
Enter a number in the "Recall data from bank=1" to set the storage location
in non-volatile memory.
Voltage
Only records voltage data during the data acquisition period.
Current
Only records current data during the data acquisition period.
Voltage and current
Records current and voltage data during the data acquisition period.
configuration menu of the data logging function.
Copyright © Itech Electronic Co., Ltd.
Basic Operation
129