ITech IT-M3900C Series User Manual page 129

Edit Static PV Curve
You can edit the static PV curve and save it inside the instrument (up to 100
curve records can be saved), or you can customize the editing of the PV curve
(up to 1 can be saved).
User- User-definable PV curves
de-
fined
Voc
Imp
Vmp
Isc
Table Indicates a user-defined 4096-point I-V data table. This
menu item is reserved and can only be used in PV SAS
software sold separately. This function cannot be used in
the VFD screen.
Filter Filter the input voltage of the instrument to reduce
interference.
Low The filtering speed is low speed.
Mid The filtering speed is medium speed.
Fast The filtering speed is high speed.
Copyright © Itech Electronic Co., Ltd.
Power Supply Function
SANDIA
E-
N50530
Save To Set the saved file name. Pa-
rameter setting ranges from 1
to 100
Set the open-circuit voltage value.
Set the maximum power current value.
Set the maximum power voltage value.
Set the short-circuit current value.
•
TF: Thin-Film
•
SCMC: Stand-
ard Crystalline
or Multi-
crystalline
•
HEC: High-effi-
ciency
Crystalline
•
TF: Thin-Film
•
cSi
118