Connection Of Additional Equipment - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3

Connection of additional equipment

Barcode reader
It is possible to connect a barcode scanner
USB type and we recommend using a "Datalogic Heron D130" barcode scanner.
The barcode scanner must be connected to the USB A connector
back of the device.
The barcode scanner is avaliable as an option - see
USB Memory Key
When importing and exporting data you may use a USB memory key
must be connected to the USB A connector
USB Keyboard

A keyboard can be connected to the device for keying in various data. The keyboard must
be a USB type and it can be connected to the USB A connector
of the device.
1
SmartPen
SmartPen is an optional needle retainer/measuring gas extractor with built-in protection and
lock. The SmartPen replaces the standard needle set and must be connected to the
measuring gas inlet (labelled
EN

to CheckMate 3. The barcode scanner must be a
"Options" on page

(labelled
2
) on the right side of the device.
User Guide

(labelled ) at the
56.

. The memory key
) at the back of the device.

(labelled ) at the back
3
4
P/N 300042-I
05/2019
13