Product Menu; Edit Product - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3

Product menu

Selecting Product menu from the Main menu will display a menu with available product
options.
Product menu
Total no. of products: 10

Edit product

New product
Copy product
Delete product
View collected data
Delete collected data
Delete all collected data
Selecting a function will display all products in the last used order. To find a product by
sorting all products in a different order press
Up to 1000 different products can be stored.
Edit product
This function allows you to edit the set-up of a product. The following parameters can be set
for each product:
Product name
Product number
Barcode ID
Measure mode
Display gasses
Concentration alarms 1 - 6
EN
Products: 10
25: Meat Mix 1000gr.
9999: Junk food
47: Meat 400gr.
7: Meat Mix 400gr.
99: Food
1: Sausage
key.
A unique product name of up to 40 characters
A random product number (0 to 999999)
Unique product barcode. Used to perform a quick product
selection using the barcode reader (option)
Select between the following 4 measuring modes:
Manual spot, Auto spot, Intermittent and Continuous.
See "Measuring modes" on page 22
For the Manual spot and Intermittent modes you must set
the required sample and delay times.
Select whether or not a value should be displayed on the
measuring screen. The number of potential gasses depends
on the CheckMate 3 type and the sensors installed. Up to 4
gasses/values can be displayed on the measuring screen.
Setting of the alarms. You have the following options for each
alarm:
- Inactive (Off ), High alarm or Low alarm
- The limit value that must be exceeded to activate the
alarm.
- The gas/value to be used for the particular alarm.
User Guide
for details.
continues...
P/N 300042-I
05/2019
33