Menus And Settings; General; Main Menu - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3

3. Menus and Settings

General

When device is switched on (after power off ) it is locked in User access level. In User access
level the operator has access to a limited number of functions only and is not allowed to
perform parameter set-up.
To obtain full access you have to change the device to Supervisor access level.
See "Access level" on page 45

Main menu

Pressing the key from the measuring screen brings up the Main menu
Product: 47
Meat 400 gr.
Measuring mode: Manual spot
Product
0,482 29,5
%
O
2
70,0
Bal
Press to measure
From the Main menu you can select the following submenus:
Menu items marked with an asterisk (*) are not available in User access level.

Product menu*

Data log

Diagnostic menu

General setup*

Access level

Calibration*
EN
for details.
08/17/06 13:46
Menu
%
CO
2
Create, edit and delete products.
Display and delete logged product data.
See "Product menu" on page 33
View logged data for currently selected product.
See "Data log" on page 36
Display device's internal parameters and error diagnostics.
See "Diagnostic menu" on page 36
Setting of various device parameters.
See "General setup" on page 37
Selection of access level for User, Supervisor and Service.
See"Access level" on page 45
Calibration of sensors - for Service Technicians only.
Main menu
08/17/06
Product menu
Data log
Diagnostic menu
General setup
Access level
Calibration
Export / Import
Standby
Sleep
Language
for details.
for details.
for details.
for details.
for details.
User Guide 31
13:46
P/N 300042-I
05/2019