Zirconia O 2 Sensor; Electrochemical O 2 Sensor; Co 2 Sensor - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3
Zirconia O sensor
2
Measure time
Sample volume
Typical sample volume
Reference gas
Service calibration interval
1
This time should be increased when the sample pressure is lower than atmospheric pressure.
Electrochemical O
Measure time
Sample volume
Typical sample volume
Response time (T
95
Service calibration interval
1
This time should be increased when the sample pressure is lower than atmospheric pressure.
2
The sample time (and volume) can be increased by the DST function .
"Dynamic Sample Time (DST)" on page 18
See
CO sensor
2
Measure time
Sample volume
Typical sample volume
Service calibration interval
1
This time should be increased when the sample pressure is lower than atmospheric pressure.
EN
Min. 3 sec. (incl. 1 sec. measure delay time)
Min. 1,35 ml (with a 3 sec measuring time and a flow of
27 ml/min)
2,83 ml ( with a 5 sec measuring time and a flow of
34 ml/min)
Ambient atmospheric air (20.9 % O
12 months
sensor
2
Min. 7 sec. (incl. 1 sec. measure delay time)
Min. 3,15 ml (with a 7 sec. measuring time and a flow
of 27 ml/min)
3,97 ml (with a 7 sec. measuring time and a flow of
34 ml/min)
) 9 seconds
6 months
Min. 10 sec. (including 1 sec measure delay time)
Min. 4,5 ml (with a 10 sec measuring time and a flow of
27 ml/min)
8,5 ml (with a 15 sec measuring time and a flow of
34 ml/min)
12 months
2
.
User Guide
1
)
2
1
1
P/N 300042-I
05/2019
53