Logging Off; Daily Start-Up - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3

Logging off

To log off press the
When device is switched into Standby or Sleep mode either automatically or when manually
selected from the "Main menu", current user will be logged off.

Daily Start-Up

At the start of the working day the device will normally be in one of the following modes:
• Switched Off
• Standby mode
• Sleep mode
Starting the device from the either of the three modes is described in the following:
1. If device is switched off apply power to it.
If device is in either Standby or Sleep mode simply touch the screen.
2. If no login is required the device will start up and automatically run a self-test and warm-
up period of approx. 10 min.
Product: 47
Meat 400 gr.
Measuring mode: Manual spot
Product
Heating
Time left XX min
If device is started from Standby mode the sensor temperature has been maintained and the device
will be ready after max. 1 min.
3. If User login or login with User ID is required, login as described in
4. After a successful login the device runs the self-test and warm-up period and when
finished the display changes to show the measuring screen.
Product: 47
Meat 400 gr.
Measuring mode: Manual spot
Product
0,482
%
O
2
70,0
Bal
Press to measure
5. Now the device is ready to begin measuring.
EN
key from the measuring screen.
08/17/06 13:46
Menu
08/17/06 13:46
Menu
29,5
%
CO
2
User Guide
"Login" on page 16.
P/N 300042-I
05/2019
17