Data Log Setup - Ametek mocon Dansensor CheckMate3 User Manual

38 User Guide
DST
Standby after
Sleep mode after
Printer header
Supervisor pin code setup

Data log setup

Selecting Data log setup ... from the General setup menu will display a screen showing the
data logging parameters.
Data log setup
Log alarms only
Log interval
Log to internal memory
Print each measurement
Mark measurement as invalid
Network logging setup
Network logging
This is where you make all settings for logging of data.
As most of the parameters are self-explanatory only items requiring for further clarification
are described below:
Log to internal memory
P/N 300042-I
05/2019
EN
Select whether or not the DST (Dynamic Sample Time)
function should be enabled - see
on page 18 for details.
NOTE! Do not disable DST function on the device
without consulting an authorised Dansensor
Service Point. Disabling DST has great influence on
the measuring accuracy!
Time before device switches into Standby mode when not in
use.
(0 = Off ) (1-100,000,00 min.)
Please note that even though function is set to 0 (Off ) the
device can still be forced into Standby mode by selecting
Standby from the Main menu - see
details.
Time before device switches into Sleep mode when not in use.
(0 = Off ) (1-100,000,000 min.)
Please note that even though function is set to 0 (Off ) the
device can still be forced into Sleep mode by selecting Sleep
from the Main menu - see
Select header text for printouts (ex. company name).
Setting up the pin code required for changing from User
access level to Supervisor access level.
(See "Access level" on page 45
13:46
08/17/06
No
6 sec
Yes
No
Yes
No
Select whether or not log data should be saved in the internal
memory of the device to be displayed and printed from the
Data log menu (see
Yes Log data is saved internally and send to
COM-port/LAN-server.
No Log data is send only to COM-port/LAN-server.
Dansensor
"Dynamic Sample Time (DST)"
"Standby" on page 49
"Sleep" on page 50 for details.
for details).
"Data log" on page 36).
®
CheckMate 3
for