The Measuring Screen - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3

The Measuring screen

Product: 47
Meat 400 gr.
Measuring mode: Manual spot
Product
2,49
%
O
2
72,4
Bal
Press to measure

Upper section

Yellow bar

Measurement section

Bottom
When display shows the measuring screen you can use the
contrast.
EN
08/17/06 13:46
1
2
Menu
25,1
%
CO
2
3
4
The upper section of the measuring screen displays the
current date and time, currently selected product number,
product name and product measuring mode.
After each measurement perfomed in either Manual spot or
Auto spot mode the section will display the text Press here to
mark measurement as invalid on an orange background.
Pressing anywhere on the screen will subsequently save the
recent measurement as invalid in the data log.
Function can be disabled - see
details.
Shows the functions available from the measuring screen:
Pressing the
screen (see "Selecting a product for measuring" on page 23
details).
Pressing the
(see "Main menu" on page 31
This section displays the result of the recent measurement.
Only values selected for display in the product set-up are
displayed - see
Text colors indicate whether or not a value has exceeded an
alarm limit:
Black indicates that the result is either within limit or that
no limit is defined for this gas.
Red indicates that the gas concentration has exceeded
an alarm value. The arrow symbol in front of the
value indicates whether it is an upper or lower alarm.
During heating up the remaining heating time is also
displayed in this area.
Shows required user operation or measuring status f.ex. "Data
required. Press
"Data log setup" on page 38
key takes you to the Last used products
key takes you to the Main menu screen
for details).
"Edit product" on page 33
" or "Measuring".
and
User Guide
for
for
for details.
keys to adjust screen
P/N 300042-I
05/2019
21