Daily Shut-Down; Error Messages - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3
13. When finished the needle
the needle holder
3

Daily Shut-down

At the end of the working day you have various options to shut the device down:
Switch device off
Set the device to Standby mode
Set the device to Sleep mode
For a detailed description of the various modes - see

Error messages

Four types of error messages may occur in CheckMate 3:
• Information
• Warnings
• System error
• System failure
In case of an error an error number and an error message for identification of the error is
displayed.
The error must be acknowledged by pressing
The error number may be reported to a Service Technician to correct any errors.
A list of the most recent errors is available from the Diagnostics menu - see
on page 36 for details.
EN

should be removed from the product package and placed in

on the side of device.
9
Simply switch off the main switch on the backside of the
device.
Select Standby from the Main menu.
The device switches into Standby mode.
If a time has been set for Sleep mode in "General setup"
(see page
Standby mode to Sleep mode when set time is
reached.
Select Sleep from the Main menu.
The device switches into Sleep mode.
37) the device will automatically switch from
"Modes" on page 15.
.
User Guide
"Diagnostic menu"
P/N 300042-I
05/2019
27