Operation And Maintenance; Modes - Ametek mocon Dansensor CheckMate3 User Manual

®
Dansensor CheckMate 3

2. Operation and Maintenance

Modes

The device can be in one of 5 modes:
Switched off
Standby mode
Sleep mode
Ready mode
Measuring
mode
EN
Power supply disconnected.
Display shows the Standby screen.
User has been logged off (if login is
required).
Sensor temperature is maintained.
Standby mode settings are set in "General
setup" - see page 37 for details.
Display shows the Sleep screen.
User has been logged off (if login is
required).
Sensor temperature is not maintained.
Sleep mode settings are set in "General
setup" - see page 37 for details.
Display will normally show the measuring
screen.
Sensor has correct temperature.
Display will normally show the measuring
screen.
Measuring has been started on the
While measuring the display will
continuously show measurement values.
When in "Manual spot" measuring mode a
progress bar is displayed in the bottom of
the screen.
User Guide
Standby
13:46
08/17/06
Sleep
13:46
08/17/06
Product: 47
Meat 400 gr.
Measuring mode: Manual spot
Product
0,482 29,5
%
O
2
70,0
Bal
Press to measure
Product: 47
Meat 400 gr.
Measuring mode: Manual spot
Product
key.
0,482 29,5
%
O
2
70,0
Bal
P/N 300042-I
15
08/17/06 13:46
Menu
%
CO
2
08/17/06 13:46
Menu
%
CO
2
05/2019