Installing X330-20Gtx And X330-28Gtx Switches On A Wooden Wall; Plywood Base For A Wall With Wooden Studs; Figure 51: X330 Switch On A Wall With A Plywood Base - Allied Telesis x330 Series Installation Manual

Chapter 7: Installing x330-20GTX and x330-28GTX Switches on a Wall

Installing x330-20GTX and x330-28GTX Switches on a Wooden Wall

This section contains the procedures for installing the switch on a wooden
wall.
Plywood Base for
When installing the switch on a wall that has wooden studs, Allied Telesis
recommends installing the device on a plywood base. (A plywood base is
a Wall with
not required for concrete walls.) Refer to Figure 51.
Wooden Studs
Wall Studs
Wall
Plywood Base
Figure 51. x330 Switch on a Wall with a Plywood Base
88