Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 433

14. OPTIONS AND AUXILIARY EQUIPMENT
(7) MR-J3BTCBL03M
This cable is a battery connection cable. Use this cable to retain the current position even if the encoder
cable is disconnected from the servo amplifier.
(a) Connection of servo amplifier and servo motor
Servo amplifier
CN2
Battery
Note. For the encoder cable, refer to (1) to (6) in this section.
Cable model
MR-J3BTCBL03M Receptacle: 36210-0100PL
Shell kit: 36310-3200-008
(3M)
Or
Connector set: 54599-1019
(Molex)
Cable model Cable length
MR-J3BTCBL03M 0.3m
1)
MR-J3BTCBL03M
2)
3)
1) CN2 side connector
For HF-MP HF-KP
LP HF-JP series servo motor
(Note)
Encoder cable
2) Junction connector
Plug: 36110-3000FD
Shell kit: 36310-F200-008
(3M)
14 - 24
Application
HF-SP HA-LP HC-RP
Servo motor
3) Battery connector
Connector: DF3-2EP-2C
Contact: DF3-EP2428PCA
(Hirose Electric)
HC-UP HC-