Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 31

1. FUNCTIONS AND CONFIGURATION
Servo amplifier
MR-J3-
Item
In operation
Ambient
temperature
In storage
In operation
Ambient
humidity
In storage
Ambient
Altitude
Vibration resistance
Mass
Note 1. 0.15A is the value applicable when all I/O signals are used. The current capacity can be decreased by reducing the number of
I/O points.
2. Use an external dynamic brake for this servo amplifier. Failure to do so will cause an accident because the servo motor does not
stop immediately but coasts at emergency stop. Ensure the safety in the entire equipment.
60T4 100T4
[ ]
[ ]
[ ]
[ ]
Free from corrosive gas, flammable gas, oil mist, dust and dirt
[kg] 1.7 1.7
200T4 350T4 500T4
0 to 55 (non-freezing)
32 to 131 (non-freezing)
20 to 65 (non-freezing)
4 to 149 (non-freezing)
90%RH or less (non-condensing)
Indoors (no direct sunlight)
Max. 1000m above sea level
2
5.9 m/s , 10to 55Hz (directions of X, Y and Z axes)
2.1 4.6 4.6
1 - 12
700T4 11KT4 15KT4
6.2 18 18
22KT4
19