Panel Top Mounted Glass/Acrylic Installation - tayco Cosmo Installation Manual

panel top mounted glaze installation
1. Check the panel top mounted
glaze base extrusion if there's a
clip on both ends before placing it
on top of the trim. Move the base
extrusion into position, (Figure 1).
2. Using a cordless drill, insert the
#10 x 1 1/2" pan head self drilling
screws through each of the holes
leading into the top trim of the
panel, (Figure 2).
MARCH 2017
FIGURE 1
CLIP
FIGURE 2
drill allen key #2 Robertson bit
PANEL TOP
MOUNTED GLAZE
BASE EXTRUSION
TOP TRIM
PANEL
tools & hardware needed
#10-1x 1/2" self
1/4-20 x 1/4"
set screws drilling screw
cosmopolitan 91