Table of Contents
Advertisement
panel assembly - straight configuration w/ filler (cont'd)
3. Remove the tiles on one side of
each panel.
4. Insert straight connectors
between the two panels.
5. Using a 6-inch hex key, install
the 25 mm or 1-inch hex screws
into the inside edge of the panel
frame; this will protrude into the
STRAIGHT CONNECTORS,
(Figure 3).
MARCH 2017
FIGURE 3
TOP VIEW
25mm HEX
SCREW
STRAIGHT
CONNECTOR
25mm HEX
SCREW
cosmopolitan 15
Advertisement
Table of Contents
