2. Unpack products in the general order of installation (refer to Installation Sequence). WASTE MANAGEMENT 1. Establish a trash removal area separate from the product staging area. July 2023 metro 3...
Painted Metals Tayco’s painted metal products are powder-paint-coated. To clean these products, use a damp cloth, using only a small amount of lukewarm water if necessary. Dry with a clean a dry cloth. To avoid scratching and damaging the painted surface, do not use hard bristled brushes or abrasive.
• Always load the heaviest files in the bottom drawer. Heavy Load • Some products must be anchored to the wall to ensure stability & safety. • It is the owner and installer’s responsibility to ensure that the wall type and construction are of sufficient strength to carry loads of any wall‐mounted products and their contents. • Failure of the wall and anchors to support all imposed loads may result in property damage and/or personal injury. • Tayco can provide the size and empty weight of its products only. A wall blocking is considered a building construction process, Tayco cannot provide recommendations in this respect and cannot be responsible for damage or injury that may occur as a result of improper installation and/or blocking. Instability Hazard Mobile items on casters such as flip tops, personal and movable tables of any type, and storage items of any type may present an instability hazard if not secured correctly while in use or storage. Flip‐top tables or training tables of any type are inherently more unstable when folded. Tayco provides the following guidelines & warnings when using mobile products: • Lock casters immediately after moving. Do not leave the casters unlocked when in use or storage. • Motion may increase the instability of any item with casters. If the wheels hit an obstruction the table’s forward momentum often causes overturn, especially if the item is not equipped with wheel extensions. Exercise strong caution while moving these items. • Use caution when abrupt level changes in the floor are present (such as a doorway or room threshold) as caster failure or tipping may result. • Do not stand, sit or lean on mobile items for support. They are not intended for this use and personal injury or property damage may result. • Mobile units that feature height‐adjustable elements must be lowered to the minimum compressed height when moving to prevent instability. It is also recommended the user remove all computer equipment or other accessories to prevent possible weight imbalance or damage to equipment. • Failure to follow the guidelines above may result in property damage or personal injury. July 2023 metro 5...
42" 39.75" overhead storage unit properly 48" 45.75" (Figure 2). 54" 51.75" 60" 57.75" 66" 63.75" 72" 69.75" FIGURE 2 2" 1.5" 7.16" 1.5" 3.1" KEEP CLEAR USE THE APPROPRIATE ANCHORS/FASTERNERS DEPENDING ON THE WALL/STUD MATERIAL July 2023 metro 71...
Page 73
NOTES: > make sure no electrical wires are on the way of the screws. tools & hardware needed measuring #8;2" flat head drill tape torpedo level stud finder Philips bit wood screw July 2023 metro 72...
Place the laminate end gables in the waste bin and the screws in the recycle bin containing steel materials. Continued on the next page >> Figure 2 tools & hardware needed Drill Robertson # 2 July 2023 metro 78...
Page 80
. Place Figure 3 the 90° steel brackets and screws in the recycle bin containing steel materials. 10. Place the laminate modesty the waste bin. Figure 4 tools & hardware needed Drill Robertson # 2 July 2023 metro 79...