tayco Cosmo Installation Manual page 46

panel to wall - adjustable connection (cont'd)
9. Insert the frame-square tubing
configuration into the adjustable
wall connector according to the
gap between frame and wall.
Tighten frame-square tubing with
wall connector on both sides
using 11/16-inch oval head
screws, with #2 Robertson bit,
(Figure 3).
10. Attach the top trim refer to the
section "top trim installation,
panel to wall - adjustable
connection".
11. Re-install the tiles previously
removed
NOTES:
> Illustrations show anchorage to
dry wall. Only E-Z anchors are
suitable for dry wall installation
which are provided by Tayco.
> Tayco is not responsible for
providing the appropriate
hardware for different types of
wall construction for non-Tayco
installations.
MARCH 2017
FIGURE 3
measuring
drill tape
TOP VIEW
hacksaw torpedo level
EZ anchor
1-INCH OVAL HEAD
SCREW W/
EZ ANCHOR
11/16-INCH OVAL
HEAD SCREWS
3/4-INCH MIN.
#10 SELF
TAPPING
SCREW
tools & hardware needed
#2 Robertson bit #3 drill bit
1" oval 11/16" oval
head screw head screw
cosmopolitan 46