Stackable Frame Connection To Door - tayco Cosmo Installation Manual

stackable frame connection to door

1. Remove the tiles on one side of
the panel and the stackable
panel. Insert these extrusions
into the top of the base frame of
panel door, (Figure 1).
2. Fasten the stackable frame panel
extrusions by the base frame of
the panel with a 25 mm or 1-inch
hex screw on each side. The
screws have to be inserted into
the holes provided from the
inside of the panel frame; use a
6-inches hex key to tighten,
(Figure 2).
MARCH 2017
FIGURE 1
STACKABLE PANEL
PANEL DOOR
FIGURE 2
11/16-INCH OVAL
HEAD SCREW
U BRACKET
cosmopolitan 33