Table of Contents
Advertisement
power pole installation
1. Inspect ceiling condition before
beginning installation. If ceiling
material is acoustical tile, remove
tile above power pole before
attaching the pole to the panel.
2. Attach 8-inches of the power
pole to the panel frame with the
two self-tapping screws supplied,
(Figure 1).
3. Remove the clamp on the open
end of the harness, so it can be
fed through the panel
connectors, (Figure 2).
4. Lay the cable in the power pole.
Clip the two halves of the power
pole together, (Figure 3).
MARCH 2017
FIGURE 1
8-INCHES
FIGURE 2
CLAMP
FIGURE 3
POWER POLE
#10 1-INCH SELF
TAPPING SCREW
CABLE
POWER POLE
cosmopolitan 106
Advertisement
Table of Contents
