Table of Contents
Advertisement
divided power pole installation
1. Inspect ceiling condition before
beginning installation. If ceiling
material is acoustical tile, remove
tile above power pole before
attaching the pole to the panel.
2. Attach 8-inches of the power
pole to the panel frame with the
two self-tapping screws supplied
(Figure 1). Install the screws on
an angle, (Figure 2).
3. Remove the clamp on the open
end of the harness, so it can be
fed through the panel connectors
(Figure 3).
MARCH 2017
FIGURE 1
8-INCHES
FIGURE 2
FIGURE 3
CLAMP
POWER POLE
#10 1-INCH SELF
TAP SCREW
cosmopolitan 108
Advertisement
Table of Contents
