Table of Contents
Advertisement
panel kickplate installation
1. Remove tiles on one side of
panel. Base clips must be
pre-installed prior to installing the
kick plate.
2. Install the chrome clips at the
very last slot at the bottom of
frame, by pushing the clip down
and up into the slot, (Figure 1).
The clip can be removed by
pushing the upper cut out on the
clip from the back of the frame.
3. Take the kick plate and angle it
at a 45-degree angle. Insert the
bottom clip into the slotted holes
at the bottom of the kick plate.
Then raise the kick plate up and
push it into the frame until it
clicks into the black clip,
(Figure 2).
MARCH 2017
FIGURE 1
FIGURE 2
BLACK CLIP
CHROME CLIP
BLACK CLIP
RACEWAY
cosmopolitan 49
Advertisement
Table of Contents
