Table of Contents
Advertisement
panel electric installation (cont'd)
5. Pop-out the outlet cover located at
the top of the raceway, (Figure 6).
6. Insert the plastic gasket on top
edge of the outlet cover opening,
(Figure 7).
7. Place the panel kick plate, (see
panel kick plate installation).
MARCH 2017
FIGURE 6
FIGURE 7
FIGURE 8
drill
#3 Robertson bit
#2 Robertson
2 per power module,
11/16" oval head
long bit
screw
OUTLET COVER
PLASTIC GASKET
PLASTIC GASKET
tools & hardware needed
2 per vinyl holder,
5/8" flat head screw
1, plastic gasket
cosmopolitan 104
Advertisement
Table of Contents
