Care And Maintenance - tayco Cosmo Installation Manual

care and maintenance

Fabrics
To remove dust particles, lightly vacuum the fabric surface. Spills and fluid should be immediately blotted. For
minor fabric stains and marks use water-based fabric solvent, applying light pressure, to lift the dirt and stain. Any
use of water and soaps may harm the fabric, causing water stains and damage to the fabric's contents. Do not
scrub the fabric with bristle or vacuum brushes as the fabric may pill or tear and the appearance may be
permanently affected. Professional steam cleaning is recommended.
Laminates
Dust laminated surfaces for regular maintenance. Clean any dirt or stain with a damp cloth. Do not use an
excessive amount of water, abrasive cleaners, acids or alkalis and do not scratch or scrape surfaces. For
persistent stains and marks use a commercial cleaner, such as Cabinet
manufactured by Magic American Corporation.
Acrylic
Dust regularly to keep surfaces free of dust particles. Clean any dirt with a damp cloth. Dry the area using a dry
paper cloth. The use of fiber cloths or rags is not recommended as loose particles and debris remaining on the
cloth may scratch or harm the acrylic surface. Do not use other chemical cleaners or window cleaners as their
chemical compositions may alter and/or permanently affect the surface appearance.
Painted Metals
Tayco's painted metal products are powder-paint-coated. To clean these products, use a damp cloth, using only a
small amount of lukewarm water if necessary. Dry with a clean, dry cloth. To avoid scratching and damaging the
painted surface, do not use hard bristled brushes or abrasives.
*THE USE OF HARSH CLEANERS AND CHEMICALS MAY PERMANENTLY ALTER THE PRODUCT FINISH
APPEARANCE AND WILL VOID ANY WARRANTY.
MARCH 2017
or Countertop
cosmopolitan 6
both