Top Mounted Screen Installation - tayco Cosmo Installation Manual

top mounted screen installation

1. Verify the type of top trims the
panels have.
Curved top trims ensure that the
rubber mushroom bumper are in
place, (Figure 1).
Straight top trims ensure that the
rubber mushroom bumper are
removed, (Figure 2).
2. Position the top screen clamp
gaskets on the screen centered
over the bottom holes.
3. Snap the top trim mounted screen
clamps to the top trim mounted
privacy screen, (Figure 3).
4. Snap the top trim mounted screen
assembly on the top trim at the
specified location, (Figure 4).
NOTES:
> The top trim mounted screen is
off-module between panels, and
can be specified the same width
as the panel it is to be mounted
to, or less.
> The top trim mounted privacy
screen does not provide
acoustical privacy.
> The top trim mounted privacy
screen is not load bearing.
MARCH 2017
FIGURE 1
CURVED TOP TRIMS
FIGURE 3
FIGURE 4
FIGURE 2
STRAIGHT TOP TRIMS
TOP TRIM
MOUNTED SCREEN
TOP SCREEN
CLAMP GASKET
TOP TRIM MOUNTED
SCREEN CLAMP
cosmopolitan 90