Table of Contents
Advertisement
panel electric installation (cont'd)
3. Connect power modules and
communication kits on the bar at
the surface level, using two oval
head #10 screws (11/16-inch) for
each module or communication
kit, (Figure 4).
4. Connect the correct electrical
harnesses, (Figure 5).
MARCH 2017
FIGURE 4
FIGURE 5
drill
#2 Robertson
#3 Robertson bit
long bit
tools & hardware needed
2 per power module,
2 per vinyl holder,
11/16" oval head
5/8" flat head screw
screw
cosmopolitan 103
Advertisement
Table of Contents
