Table of Contents
Advertisement
worksurface support installation -
cantilever & bracket (cont'd)
4. Proceed in the same way as
stated above to install the
universal brackets. They are
primarily used for corner
surfaces, (Figure 4); or for panel
end runs, when a return panel at
the end run is required (used a
left and a right sided bracket in
this case), (Figure 5).
NOTE:
> Surfaces do not need mending
plates for attachments, as their
supports have welded plates on
top for attaching surfaces.
MARCH 2017
FIGURE 4
UNIVERSAL BRACKETS FOR CORNER SURFACES
FIGURE 5
LEFT
UNIVERSAL BRACKETS FOR PANEL END RUNS
RIGHT
cosmopolitan 70
Advertisement
Table of Contents
