Table of Contents
Advertisement
metal pedestal to metal filler bracket
1. Remove drawers from the metal
pedestal by engaging the release
lock located on the sides of the
drawer, (Figure 1).
2. Peel the film of the double sided
tape attached to the metal filler
bracket, (Figure 2).
3. Position the metal filler bracket to
gable side of the metal pedestal;
and secure with three #10x5/8"
self drilling screws, (Figure 2).
*Left-hand 30"D configuration shown.
MARCH 2017
DRAWER
RELEASE LOCK
FIGURE 1
FIGURE 2
FOR 24"D WORKSURFACE
DRILLING SCREWS
DOUBLE-SIDED
TAPE
FILLER BRACKETS
FOR 30"D WORKSURFACE
#10x5/8" SELF
cosmopolitan 78
Advertisement
Table of Contents
