tayco Cosmo Installation Manual page 109

divided power pole installation (cont'd)
4. Lay the cables in the power pole.
Clip the two halves of the power
pole together (Figure 4).
5. Slip the power pole grommet
over the power pole; secure it
with one screw (Figure 5). Cut a
hole through the ceiling above
the power pole and reposition
the tile in the ceiling.
6. Install the approriate panel fillers
(Figure 6)
MARCH 2017
FIGURE 4
FIGURE 5
FIGURE 6
POWER POLE
POWER POLE
GROMMET
plastic cap with power pole hole
power pole power pole
straight cap cross cap
drill #3 Robertson bit
11/16-INCH OVAL
HEAD SCREW
POWER POLE
CAP
power pole power pole
T cap
tools & hardware needed
1, 11/16" oval 2, #10 1" self
head screw tap screw
cosmopolitan 109