Table of Contents
Advertisement
door with stackable frame to wall -
adjustable connection (cont'd)
9. Insert the frame-square tubing
configuration into the adjustable
wall connector according to the
gap between frame and wall.
Tighten frame-square tubing with
wall connector on both sides
using 11/16-inch oval head
screws, with #2 Robertson bit,
(Figure 3).
10. Attach the door with stackable
frame to panel frame; refer to the
installation guide: stackable
frame connection to door with
stackable panel frame.
11. Install the tiles; refer to the
intallation guide: panel tile
installation.
12. Attach the top trim refer to the
section "top trim installation,
panel to wall - adjustable
connection".
13. Step on the metal threshold bar
to level off with the floor.
NOTES:
> Illustrations show anchorage to
dry wall. Only E-Z anchors are
suitable for dry wall installation
which are provided by Tayco.
> Tayco is not responsible for
providing the appropriate
hardware for different types of
wall construction for non-Tayco
installations.
MARCH 2017
FIGURE 3
1-INCH OVAL HEAD
SCREW W/
EZ ANCHOR
#10 SELF
TAPPING
SCREW
3/4-INCH MIN.
measuring
drill
tape
25mm HEX SCREWS
11/16-INCH OVAL
HEAD SCREWS
25mm
HEX SCREWS
TOP VIEW
hacksaw
torpedo level
EZ anchor
STACKABLE
DOOR PANEL
STACKABLE
PANEL FRAME
tools & hardware needed
#2 Robertson bit #3 drill bit
1" oval
11/16" oval
head screw
head screw
cosmopolitan 41
Advertisement
Table of Contents
