Glazed Countertop Installation - tayco Cosmo Installation Manual

glazed countertop installation

1. Locate where the glazed
countertop is being installed.
This can be easily identified by
locating the top trims that have 1
3/4-inches holes pre-drilled
through them.
2. Remove the the top panel tiles
on both sides of the panel.
Insert the 2 1/2-inches head
machine screws through the
pre-drilled holes in the panel
frame from bottom to top.
3. With one hand holding the
hexagon screw at the bottom,
insert the glazed counter support
on top and twist on tight.
4. Place the correct size tempered
glass on top of the glazed
countertop supports, then insert
the threaded knobs and hand
tighten clockwise to the glass.
5. Re-install the top panel tiles,
(Figure 2).
MARCH 2017
FIGURE 1
FIGURE 2
THREADED KNOB
GLAZED COUNTER
SUPPORT
2 1/2-INCHES HEAD
MACHINE SCREW
cosmopolitan 66