M306NKT-EPB User's Manual
3.3 Hardware Breakpoint Setting Window
(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
2. Hardware breakpoint setting window
3. Opening the break event setting dialog box
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
3. Usage (How to Use the Emulator Debugger)
Hardware breakpoint
Clicking this button opens the hardware breakpoint setup dialog box.
H/W Break Point Setting window in initial state
Select the "Enable H/W Break" check box, and this break function will
be enabled, allowing you to set hardware breakpoints.
Setting break event
Click the event line at which you want set a break event.
Specifying the event type
Click to select the event type you want to set.
- FETCH
Detects an instruction prefetch.
- DATA ACCESS
Detects a memory access.
- BIT SYMBOL
Detects a bit access.
- INTERRUPT
Detects an interrupt occurrence or interrupt termination.
- TRIGGER
Detects a signal from the external trace signal input cable.
Page 62 of 104