M306NKT-EPB User's Manual
(3) Errors Occur at Emulator Debugger Startup
Table 5.3 Checkpoints of errors at debugger startup
Error
ERROR 16224:
Target MCU is uncontrollable.
Execute the RESET command.
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
(1) Check that the NQPACK etc. mounted on the user system is soldered
properly.
(2) Check that the connector is installed properly to the user system.
(3) In memory expansion mode or microprocessor mode, check pins
RDY# and HOLD# are at "H" level.
5. Troubleshooting
Checkpoint
Page 99 of 104