M306NKT-EPB User's Manual
(4) Executing up to the cursor position (Come command)
1. Specifying the Come command
2. After the Come command has finished
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
3. Usage (How to Use the Emulator Debugger)
Setup procedure for executing COME command
(1) Click the line in the program display area at which you want the
program to execute.
(2)
Click the Come button
The cursor stops in the position where the come command was
executed.
The statement specified with the come command is not executed.
Page 61 of 104