Table of Contents
Advertisement
M306NKT-EPB User's Manual
(3) When DATA ACCESS is selected
1. Window for setting the address
2. Window for setting data
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
3. Usage (How to Use the Emulator Debugger)
Setting the address
Set in the Address tab.
You can set eight conditions, e.g., a specified address, a specified
address range, etc.
After finishing the setting the address, set the data.
Setting data
Set in the Data tab.
You can set eight conditions, e.g., a specified data, a specified data
range, etc.
Setting the access condition
You can set three conditions, e.g., read, write, and read/write. When
you have finished setting the data and access condition, click OK.
Page 64 of 104
Advertisement
Table of Contents
