Renesas M16C/6N User Manual page 61

M306NKT-EPB User's Manual
(2) Setting address match breakpoints
1. Setting and executing address match breakpoint
2. Execution completed with address match break
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
3. Usage (How to Use the Emulator Debugger)
Program execution with address match breakpoint
An address match breakpoint can be set by selecting "Enable the
Address Match Interrupt Break Function" in Init dialog box of the
MCU tab.
- A software breakpoint can be set or cleared by double-clicking the
address match breakpoint display area in the editor (source)
window (A blue circle is displayed at the setting line). Up to eight
points can be set.
- Click the execution button.
The cursor stops in the position where the address match break was
set up.
The statement in which the address match break was set up is not
executed.
Page 59 of 104