Connecting To A 100-Pin Lcc Socket - Renesas M16C/6N User Manual

M306NKT-EPB User's Manual

2.9.1 Connecting to a 100-pin LCC Socket

Here following is a procedure of connecting to a 100-pin LCC socket (IC61-1004-051 of Yamaichi Electronics Co., Ltd.) on
the user system using the included M30800T-PTC.
(1) Attach the CN2 side of the M30800T-PTC to the J4 side of the M306NKT-EPB.
(2) Attach the M30800T-PTC to the 100-pin LCC socket.
Figure 2.9 Connecting to a 100-pin LCC socket
Note on Connecting the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
Notes on Connectors of the Converter board:
The connectors of the M30800T-PTC are guaranteed for only 50 insertion/removal iterations.
For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
(1)
(2)
CAUTION
IMPORTANT
M3T-FLX160-EPB
M306NKT-EPB
CN2 side
M30800T-PTC
100-pin LCC socket
No. 1 pin
User system
2. Setup
Page 33 of 104