Hardware Breakpoint Setting Window - Renesas Emulation Probe M30850T2-EPB User Manual

M30850T2-EPB User's Manual

3.4 Hardware Breakpoint Setting Window

(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
2. Hardware Break Point Setting Window in initial state
3. Opening the break event setting dialog box
REJ10J1005-0200 Rev.2.00 April 1, 2007
3. Usage (How to Use the Emulator Debugger)
Hardware Break Point
Clicking this button opens the hardware breakpoint setup
dialog box.
H/W breakpoint Setting Window in initial
state
Select the "Enable H/W Break" check box, and this break
function will be enabled, allowing you to set hardware
breakpoints.
Setting Break Event
Click the event line at which you want set a break event.
Page 62 of 98