Table of Contents
Advertisement
M30870T-EPB User's Manual
3.4 Hardware Breakpoint Setting Window
(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
2. Hardware Break Point Setting Window in initial state
3. Opening the break event setting dialog box
REJ10J0482-0300 Rev.3.00 February 16, 2006
3. Usage (Emulator Debugger)
Hardware Break Point
Clicking this button opens the hardware breakpoint setup
dialog box.
H/W breakpoint Setting Window in initial
state
Select the "Enable H/W Break" check box, and this break
function will be enabled, allowing you to set hardware
breakpoints.
Setting Break Event
Click the event line at which you want set a break event.
Page 66 of 104
Advertisement
Table of Contents
