Hardware Breakpoint Setting Window - Renesas Emulation Probe M306V8T-EPB User Manual

M306V8T-EPB User's Manual

3.3 Hardware Breakpoint Setting Window

(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
2. Hardware Break Point Setting Window in initial state
REJ10J0777-0100 Rev.1.00 2005.08.01
3. Usage (How to Use the Emulator Debugger)
Hardware Break Point
Clicking this button opens the hardware breakpoint setup
dialog box.
H/W breakpoint Setting Window in initial
state
Select the "Enable H/W Break" check box, and this
break function will be enabled, allowing you to set
hardware breakpoints.
Setting Break Event
Click the event line at which you want set a break
event.
Page 55 of 90