M306NKT-EPB User's Manual
2.4 Connecting the PC7501
Figure 2.3 shows how to connect the PC7501 and the emulation probe.
Figure 2.3 Connecting the PC7501 and emulation probe
Note on Connecting the PC7501:
Always shut OFF power before connecting the emulation probe. Otherwise, internal circuits may be damaged.
Notes on Connecting the PC7501:
When connecting the emulation probe, be sure to hold the both sides of the emulation probe horizontally and
insert it directly.
The connectors of the M306NKT-EPB are guaranteed for only 50 insertion/removal iterations.
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
CAUTION
IMPORTANT
M3T-FLX160-EPB
M306NKT-EPB
2. Setup
Page 24 of 104