Table of Contents
Advertisement
M306NKT-EPB User's Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on PC7501
Upper panel LED
Init dialog box of emulator
debugger displayed
MCU Setting dialog box of
emulator debugger
Program window of emulator
debugger displayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
http://www.renesas.com/en/tools
Not normal
of PC7501
Normal
Not normal/Error displayed
Normal
Not normal/Error displayed
Normal
Error displayed
Normal
See "5.2.(3) Errors Occur at Emulator Debugger Startup" (page 99).
1. Check the connection of power supply cable.
See "2.5 Connecting the Power Supply for the Emulator "
(page 25).
2. Check that the power is properly supplied to the use system.
"
See
2.7 Downloading Firmware
3. Restart the emulator system.
1. Check the operating environment etc. of the emulator
debugger.
'
See the user
s manual of the emulator debugger.
2. Reinstall the emulator debugger.
See "5.2.(2) MCU Setting Dialog Box Does Not Appear at
Emulator Debugger Startup" (page 98).
5. Troubleshooting
"
(page 28).
Page 96 of 104
Advertisement
Table of Contents
