M306H7T3-RPD-E User's Manual
2.8 Connecting the User System
Connect the emulation pod to the user system as shown in Figure 2.9.
Figure 2.9 Connecting the user system
Note on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the
emulator or user system.
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech
Corporation.
REJ10J0964-0100 Rev.1.00 August 01, 2005
Tip of emulation pod probe
M3T-FLX100-T
(not included)
LCC socket
M3T-DIRECT100S
100-pin LCC
100-pin QFP
(included)
(not included)
M30800T-PTC
(included)
M3T-100LCC-DMS
(not included)
*1
M3T-DUMMY100S
100-pin QFP
(not included)
●: No. 1 pin
* These three products are available in one package .
CAUTION
M3T-FLX100-R
(not included)
M3T-FLX-100NRB
100-pin QFP
(not included)
2. Setup
Page 31 of 88