Connecting The Flx120-Rpd To The Emulation Pod - Renesas Emulation Pod M306H7T3-RPD-E User Manual

M306H7T3-RPD-E User's Manual

2.4.2 Connecting the FLX120-RPD to the Emulation Pod

Figure 2.3 shows how to connect the FLX120-RPD and the emulation pod.
Figure 2.3 Connecting the FLX120-RPD to the emulation pod
Note on Connecting the Cable:
Always shut OFF power before connecting the emulation pod and the FLX120-RPD. Otherwise, the
internal circuits may be damaged.
Note on Securing the Screws:
After connecting the emulation pod and the FLX120-RPD, be sure to secure the screws mounted in both
sides of the connector cover
REJ10J0964-0100 Rev.1.00 August 01, 2005
Emulation pod
FLX120-RPD (Secure with the screws)
CAUTION
IMPORTANT
2. Setup
Page 24 of 88