Table of Contents
Advertisement
E2/E2 Lite
2.2.1
Connecting the User System Interface Cable to the 20-Pin Connector
Figure 2.1 shows how to connect the user system interface cable to the 20-pin connector of the E2/E2 Lite.
User system interface cable with the 20-pin
(1.27-mm pin pitch) connector
Pin 2
Pin 1
Figure 2.1 Connecting the User System Interface Cable to the 20-Pin Connector of the E2/E2 Lite
Notes on connector insertion and removal:
When connecting or disconnecting the user-system interface cable and the emulator or user system,
grasp the connector cover at the end of the cable. Pulling the cable itself will damage the wiring.
Also, be aware that the user-system interface cable has the direction in which it must be inserted. If
the cable is connected in the wrong direction, it may be damaged.
R20UT4582EJ0100 Rev.1.00
Jul.16.19
Connector:
20-pin (1.27-mm pin pitch) connector
Samtec type number: FTSH-110-01-L-DV-K
CAUTION
Correct example
Designing the User System
User system
Incorrect example
Page 9 of 30
Advertisement
Table of Contents
