Connecting The Host Machine - Renesas Emulation Pod M306H7T3-RPD-E User Manual

M306H7T3-RPD-E User's Manual

2.3 Connecting the Host Machine

When connecting the emulator PC4701 to a host machine, interface varies depending on the PC4701 used. Figure 2.1 shows
the outline to connect each interface cable. For details on interface, refer to each PC4701 user's manual used.
Table 2.1 Operating environment of the host machine
PC4701
Dedicated parallel
PC4701HS
Serial (RS232C)
LAN (10BASE-2/5)
LPT parallel
PC4701M
Serial (RS232C)
LPT parallels
USB
PC4701U
LAN (10BASE-T)
REJ10J0964-0100 Rev.1.00 August 01, 2005
Interface
The special parallel interface cable is supplied with the PC4701HS.
For connection with the dedicated parallel interface, the parallel interface
printed circuit board (PCA4202G02: discontinued product) is required on
the host machine side.
The RS232C interface cable, 25-pin female/25-pin female conversion cable
and 25-pin female/9-pin female conversion cable are supplied with the
PC4701HS.
The LAN interface cable (10BASE-2/5) is supplied with the PC4701HS.
The LPT parallel interface cable is supplied with the PC4701M.
The RS232C interface cable and 25-pin female/9-pin male conversion cable
are supplied with the PC4701M.
The LPT parallel interface cable is supplied with the PC4701U.
The USB interface cable is supplied with the PC4701U.
No LAN interface cable is supplied with the PC4701U; it is, therefore,
necessary to arrange a LAN interface cable at your end.
Remarks
2. Setup
Page 22 of 88