Renesas Emulation Pod M306H7T3-RPD-E User Manual page 55

M306H7T3-RPD-E User's Manual
(3) Work area tab
1) Specifying the firmware
Cancel
(4) Memory space expansion tab
Cancel
(5) Clock tab
Cancel
REJ10J0964-0100 Rev.1.00 August 01, 2005
Help
Help
Help
3. Usage (How to Use the Emulator Debugger)
Specifying the firmware file
For the radio button of the firmware group box, be sure to click "Default".
Specifying the work area
Specifies the top address which is used as a work area at the start address
area of the work area group box.
- With the M306H7T3-RPD-E, set the work area address at 10000h.
- The top address of the work area is set to 2C00h by default.
Specifying the memory space expansion mode
Because the M306H7T3-RPD-E supports single-chip mode, only the radio
button "Normal" can be selected.
Specifying the target clock
Specify the clock sources supplied to the MCU (main clock and sub clock).
Select the appropriate clock sources according to the clock used by your
target MCU.
Internal
Emulator's internal clock
External
User system clock
Page 53 of 88